|
|
Technical Papers - 1994-1999
The following are references to publications that discuss
applications in which FEMtools was used or technologies
that are implemented in FEMtools. All papers are in English
unless indicated otherwise.
E. Dascotte, A. Schoenrock, Validation and Updating
of an Aeroengine Finite Element Model based on Static Stiffness
Testing. Presented at the 2nd MSC Aerospace Conference,
June 7-11, 1999, Long Beach, CA, USA.
Download (PDF, 233 KB)
A. Schoenrock, E. Dascotte, K.-H. Dufour, Validation
of an Aeroengine Carcass Finite Element Model by Means of
Computational Model Updating based on Static Stiffness Testing.
Presented at the 7th European Propulsion Forum, March 1999,
Pau, France.
Download (PDF, 233 KB)
E. Dascotte, J. Strobbe, Updating Finite Element Models
using FRF Correlation Functions, Proceedings
of the 17th International Modal Analysis Conference (IMAC),
February 1999, Kissimmee, Florida.
Download (PDF, 98 KB)
E. Dascotte, J. Strobbe, Identification of Gas
Flow Pressure Forces in a Cavity using an Inverse Method,
Proceedings of the 23rd International Seminar on Modal Analysis
(ISMA), September 16-18, 1998, Leuven, Belgium.
Download (PDF, 170 KB)
R. Cantieni, S. Pietrzko, Y. Deger, Modal Investigation
of an Office Building Floor, Proceedings of the 16th
International Modal Analysis Conference (IMAC), February
1998, Santa Barbara, California.
T. Koizumi, N.Tsujiuchi, S. Sawabe (Doshisha Univesity),
I. Kubomoto, E. Ishida (Kubota Corp.), Structural Optimization
of Tractor Frame for Noise Reduction, Proceedings of
the 4th International Conference on Motion and Vibration
Control (MOVIC), ETH Zurich, Switzerland, 1998.
T. Koizumi, N.Tsujiuchi, S. Sawabe (Doshisha Univesity),
I. Kubomoto, E. Ishida (Kubota Corp.), F. Ohtani, Optimization
for Tractor Frame Including Dynamic Characteristic of Joint
Part, Proceedings of the 15th IMAC Japan, Tokyo, Japan,
1997.
R. Swindell, E. Dascotte, The Role of Correlation
and Updating Tools in the Modelling of Engineering Structures
using the Finite Element Method, Proceedings of the
2nd International Conference on Structural Dynamics
Modeling, NAFEMS/DTA, July 1996, Cumbria, UK.
C. Reix, C. Tombini, A. Gerard, J. Strobbe, E. Dascotte,
Updating the Damping Matrix using Frequency Response
Data, Proceedings of the 14th International Modal Analysis
Conference (IMAC), February 1996, Dearborn, Michigan.
Download (PDF, 110 KB)
E. Dascotte, J. Strobbe, H. Hua, Sensitivity-Based
Model Updating Using Multiple Types of Simultaneous State
Variables, Proceedings of the 13th International Modal
Analysis Conference (IMAC), February 1995, Nashville, Tennessee.
Download (PDF, 56 KB)
E. Dascotte, Validation and Updating of ANSYS Finite
Element Models Using Experimental Modal Data, May 1994,
Proceedings International ANSYS Users Conference, Pittsburgh,
Pennsylvania
Download (PDF, 265 KB)
|
Technical
Papers