|
||
|
|
|
Technical Papers - 2000-2004The following are references to publications that discuss applications in which FEMtools was used or technologies that are implemented in FEMtools. All papers are in English unless indicated otherwise.
J. Guggenberger and H. Grundmann, Monte Carlo simulation of the hysteretic response of frame structures using plastification adapted shape functions, Probabilistic Engineering Mechanics, 19 (2004) pp. 81-91, Elsevier. Erik Euler, Identification of the Material Properties
of Slender Composite Structures, MSc Thesis, University
of Brussels, 2004. E. Dascotte, Identification of Random Material Properties
using a Mixed Deterministic-Probabilistic Method, Presented
at the International Seminar on Modal Analysis
2004 (ISMA), September 20-22, 2004, Leuven, Belgium. E. Dascotte, Integration of FE Model Validation, Uncertainty
Analysis and Design Improvement using the FEMtools Framework
Toolbox, Presented at the OPTECH04 conference, May 2004,
Breckenridge, Colorado. E. Dascotte, Linking FEA and Test, Sound and Vibration
Magazine, April 2004. Brian MacMillan, Mehdi Batel, E. Dascotte, Ben Verbeeck,
OMA Testing by SLDV with FEM Pre- and Post-Test Analysis.
Proceedings of the 22th International Modal Analysis Conference
(IMAC), January 2004, Detroit, Michigan. Jean-Francois Lord, Carlos E. Ventura, Eddy Dascotte,
Automated Model Updating using Ambient Vibration Data
from a 48-Storey Building in Vancouver. Proceedings
of the 22th International Modal Analysis Conference (IMAC),
January 2004, Detroit, Michigan. E. Dascotte, The Use of FE Model Updating and Probabilistic
Analysis for Dealing with Uncertainty in Structural Dynamics
Simulation. Presented at the 2003 Japan
Modal Analysis Conference (JMAC), September 10-12, 2003,
Tokyo, Japan. Jean-Francois Lord, Carlos E. Ventura, Eddy
Dascotte, Rune Brincker, and Palle Andersen, FEM Updating
using Ambient Vibration Data from an 48-Storey Building
in Vancouver, British Columbia, Canada. Presented at
the 32nd International Congress and Exposition on Noise
Control Engineering (Internoise 2003), August 25.28, South
Korea. H. Haapaniemi, P. Luukkanen, P. Nurkkala, J. Rostedt,
A. Saarenheimo, Correlation Analysis from Modal Analysis
of a Pipeline. Proceedings of the 21th International
Modal Analysis Conference (IMAC), February 2003, Orlando,
Florida. E. Dascotte, Simultaneous Updating of FE Models for
Different Structure Configurations. Presented
at the 2nd FENET Industry Meeting, December 11-13
2002, Prague, Czech Republic. J. Guggenberger, MI 17 Fire Firefighting Helicopter
Boom - Validation and Updating of the Analytical Models.
Presented at the 2002 NAFEMS Conference on Validation
of FEM Analysis, November 13-14, Wiesbaden, Germany. T. Lauwagie, H. Sol, E. Dascotte, Damage Identification
in Beams using Inverse Methods. Presented at
the 2002 International Seminar on Modal Analysis (ISMA),
September 16-18, 2002, Leuven, Belgium. M. Mergeay, J.-S. Servaye, E. Dascotte,
Integration of NVH Testing: A Case Study on a Spatial
Structure. Presented at the 2002 International
Seminar on Modal Analysis (ISMA), September 16-18, 2002,
Leuven, Belgium. T. Lauwagie, E. Dascotte,
Layered Material Identification using Multi-Model Updating.
Proceedings of the 3rd International Conference on Structural
Dynamics Modeling - Test, Analysis, Correlation and Validation
- Madeira Island, Portugal, June 2002. Aleksandar Pavic, Taufik Widjaja and Paul Reynolds, The Use Of Modal Testing And FE Model Updating To Investigate Vibration Transmission Between Two Nominally Identical Building Floors, Proceedings of the 3rd International Conference on Structural Dynamics Modeling - Test, Analysis, Correlation and Validation - Madeira Island, Portugal, June 2002. Carlos E. Ventura, Jean-Fran�ois Lord and
Robert D. Simpson, Effective Use Of Ambient Vibration
Measurements For Modal Updating Of A 48 Storey Building
In Vancouver, Proceedings of the 3rd International Conference
on Structural Dynamics Modeling - Test, Analysis, Correlation
and Validation - Madeira Island, Portugal, June 2002. Mehdi H.K. Kharrazi, C.E. Ventura, R. Brincker. E. Dascotte,
A Study on Damage Detection using Output-Only Modal
Data. Proceedings of the 20th International Modal
Analysis Conference (IMAC), February 2002, Los Angeles,
California. H. Haapaniemi, A. Saarenheimo, P. Smeekes, H. Talja,
Numerical Simulation of Piping Vibrations using an Updated
FE Model. Proceedings of the 20th International Modal
Analysis Conference (IMAC), February 2002, Los Angeles,
California. L. Balis Crema, G. Coppotelli, Effect of Limited DOFs
and Noise in Structural Updating, Proceedings of the
20th International Modal Analysis Conference (IMAC), February
2002, Los Angeles, California. T. Koizumi, N. Tsujiuchi, H. Tanaka, M. Okubo, M. Shinomiya,
Prediction of the Vibration In Buildings Using Statistical
Energy Analysis, Proceedings of the 20th International
Modal Analysis Conference (IMAC), February 2002, Los Angeles,
California. Brownjohn J M W, Xia P, Hao H, Xia Y, Civil structure condition assessment by FE model updating: methodology and case studies, Journal of Finite Elements in analysis and Design 37, 2001, 761-775. Y. Deger, Optimization of the Dynamic Behavior of
a Machine Tool Mounting Device. Presented at the FENET/NAFEMS
seminar on "FEM in Structural Dynamics", November 2001,
Wiesbaden, Germany. C.E. Ventura, R. Brincker. E. Dascotte, P. Andersen,
FEM Updating of the Heritage Court Building Structure.
Proceedings of the 19th International Modal Analysis Conference
(IMAC), February 2001, Kissimmee, Florida. P. Avitabile, J.M Hunnell, A. Frank, J. DeVlaminck, Study of Different Analytical Model Configurations to Account for Manufacturing Variability using Model Correlation Tools, Experimental Techniques Magazine, January/February 2001. E. Dascotte, Practical Applications of Finite Element
Model Tuning using Experimental Modal Data, Sound and
Vibration Magazine, June 1991, Revised 2000. T. Koizumi, N.Tsujiuchi (Doshisha Univesity), I. Kubomoto, E. Ishida (Kubota Corp.), F. Ohtani, Optimizing a Tractor Frame for Improved Cabin NVH, SAE Off Highway Engineering, September 2000, pp 45-49. Brownjohn J M W, Xia P, Dynamic assessment of curved cable-stayed bridge by model updating, ASCE Journal of Structural Engineering 126(2), Feb 2000, p252-261. |
© 2010 Dynamic Design Solutions (DDS) NV. All Rights Reserved.
Privacy Policy - Trademarks/Copyright - Terms/Conditions - Register/Feedback - Contact Us